Header Ads

Thermal Printer, Panel Printer, with Arduino RS232, Serial Communication

Thermal Printer, Panel Printer, with Arduino RS232, Serial Communication


Features

1) Compact Design
2) High Speed
3) High Resolution
4) Light Weight
5) Low Noise
6) Easy Loading
7) Electrostatic Protection
8) Tough Body
9) Pannel Paper Cutter

Outline

Printing Method: Thermal
Paper Width: 57.5mm
Paper Diameter: 55mm
Resolution: 203DPI
Printing Speed: Up to 90mm/s
Barcode Supported: I25,UPC-A,UPC-E,EAN-8, EAN-13,Codebar,Code39, Code93,Code128,Code11,MSI
Font: ASCII(12x24)
Graphic printing: Direct bitmap printing
Paper Sensor: Photo-sensor
Head tempeture detection: Thermistor
Communication Interface: RS232 or RS232 with TTL level
Power supply: 5V-9V
Head Life: 50km
Printing width: 48mm
Operation condition: 5~45c, 20~90%RH(40c)
Storage condition: -40~60c, 20~93%RH(40c)

Control Board Details


Printing Test

After power up, connect J1 and disconnect, one test page will be printed.

On board LED  

There is one LED on board to indicate the status of the board. The indicator is as follows: 
Blink one:  Work well 
Blink two:  No printer is detected 
Blink three:  No paper is detected 
Blank five:  Printer mechanism is overheat.

Serial Communication.

this printer integrate 2 serial communication connectors.

The RS232 connector is specially dedicated to the full RS232 protocol (+/- 12V levels), when the TTL connector is designed to handle TTL levels (0/5V levels).


RS232 and TTL Connector details.



http://printarduino.blogspot.in/2010/02/arduino-and-thermal-printers.html















AddThis Social Bookmark Button

No comments:

(C) Arshad Pathan. [Do not copy any contain without permission]. Powered by Blogger.